Electronic Throttle Valve (ETV) - Initialization
No: TSB-04-13-001DATE: January, 2004
MODEL: See below
SUBJECT
ETV INITIALIZATION PROCEDURES
- SERVICE MANUAL REVISION
PURPOSE
The following initialization procedures for the electronic throttle valve (ETV) are missing in the affected service manual pages:
The ETV must be initialized after performing any of the following operations:
^ Throttle body installation, removal, or replacement
^ Throttle body cleaning
^ PCM removal, installation, or replacement
^ Battery cable disconnect and reconnect
^ PCM reprogramming
To initialize the ETV, turn the ignition switch to the ON position (do not start engine), then turn it off. Keep it off for at least 10 seconds before starting the engine.
Write the TSB revision number of this bulletin in the "TSB Revision" box at the bottom of the affected service manual pages.
AFFECTED VEHICLES
2003 Montero
2004 Outlander
2004 Endeavor
2004 Lancer and Lancer Sportback models equipped with 2.4L MIVEC engine
AFFECTED SERVICE MANUALS
2003 Montero, Volume 1, pages 13Aa-11 and 13Aa-27
2004 Outlander, Volume 1, pages 13A-858, 13A-876, 13A-878
2004 Endeavor, Volume 2, pages 13A-1058, 13A-1073, 13A-1074
2004 Galant, Volume 2, pages 13A-1104, 13A-1119, 13A-1121
2004 Lancer, Volume 3, pages 13B-901, 13B-917, 13B-919
2004 Lancer Sportback, Volume 1, pages 13A-839, 13A-882, 13A-883