Driver/Vehicle Information Display

• Description and Operation
  • Multi-Center Display
  • Multi-Center Display System [Middle Grade Type]
• Testing and Inspection
  • Initial Inspection and Diagnostic Overview
    • Description of On-Board Diagnostics
    • Communication Error Processing (Middle Grade Type)
    • Fail-Safe Function of the Multi-Center Display Unit (Middle Grade Type)
    • Diagnosis Tips Concerning the Entire System
    • Diagnosis Tips When Only Specific Function(s) Is Defective
  • Reading and Clearing Diagnostic Trouble Codes
    • How to Read and Erase Diagnostic Trouble Codes
      • With Manufacturer's Scan Tool
      • Without Scan Tool
        • Mitsubishi Multi Communication System (MMCS)
        • Multi-Center Display System (Middle Grade Type)
    • How to Connect the Scan Tool (M.U.T.-III)
  • Symptom Related Diagnostic Procedures
    • Symptom Chart
    • Inspection Procedure 1
    • Inspection Procedure 2
    • Inspection Procedure 3
    • Inspection Procedure 4
    • Inspection Procedure 5
    • Inspection Procedure 6
  • Pinout Values and Diagnostic Parameters
• Locations
• Service and Repair
  • Procedures
    • Ambient Air Temperature Unit Customization (Middle Grade Type)
    • Manual Calibration (By Turning the Vehicle)
    • Adjust For Compass Variance
    • Deflection Angle Compensation (Compass Calibration)
    • Vehicle Magnetic Compensation Demagnetization and Correction Method
  • Removal and Replacement
• Diagrams
  • Diagram Information and Instructions
    • How to Read Circuit Diagrams
    • How to Read Configuration Diagrams
    • How to Read Splice Locations
  • Electrical Diagrams
    • Mitsubishi Multi-Communication System (MMCS)
    • Multi-Center Display (Low)
    • Multi-Center Display (Middle)
• Technical Service Bulletins
• Tools and Equipment