Seat Belts - Rear 3-Point Belt Installation Phase 2: Overview

89Nissan08

Classification:
BF89-017 Section: Body & Frame
Reference:
TECHNICAL BULLETIN TS89-118
Models: Stanza Wagon, 200SX Notchback

Date: August 10, 1989

REAR 3-POINT SEAT BELT INSTALLATION

PHASE 2


APPLIED MODELS: 1984-88 200SX Notchback (S12) 1986-88 Stanza Wagon 2WD (M10)


SERVICE INFORMATION

This bulletin describes 3-point rear seat belt installation procedures for the applied models listed above. These vehicles are already equipped with threaded fittings for installation of the 3-point belts. However, in most cases, it will be necessary to modify or replace certain trim pieces to complete the installation. Trim modification requires cutting/drilling of the quarter panel finishers. The following pages describe the installation procedures for each model.

Please make these instructions available to customers who purchase retro-fit kits and choose to install the belts themselves. Ensure that a copy of the belt operation and child seat installation instructions are provided to customers for every installation.


PARTS INFORMATION

The replacement parts necessary to complete the installation on each model are listed on page 9 of this bulletin.