Audible Warning Device: Description and Operation

WITHOUT MULTI-REMOTE CONTROL SYSTEM
The warning chime is controlled by the time control unit.

The warning chime is located in the time control unit.

Power is supplied at all times:
- through 10 A fuse [No.13, located in fuse block (J/B)]
- to time control unit terminal 7 (without power door locks) or 2 (with power door locks)
- through 10 A fuse [No.12, located in the fuse block (J/B)]
- to key switch terminal 2,
- through 10 A fuse (No.38, located in the fuse and fusible link box)
- to lighting switch terminal 11.

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse [No.10, located in the fuse block (J/B)]
- to time control unit terminal 9 (without power door locks) or 13 (with power door locks).

Ground is supplied to time control unit terminal 8 (without power door locks) or 6 (with power door locks) through body grounds M28 and M54.

When a signal, or combination of signals, is received by the time control unit, the warning chime will sound.

Ignition Key Warning Chime
With the key in the ignition switch in the OFF position, and the driver door open, the warning chime will sound.

Power is supplied:
- from key switch terminal 1
- to time control unit terminal 4 (without power door locks) or 11 (with power door locks).

Ground is supplied:
- from front door switch LH terminal 2
- to time control unit terminal 2 (without power door locks) or 7 (with power door locks).

Front door switch LH terminal 3 is grounded through body grounds B13 and B19.

Light Warning Chime
With ignition switch OFF, driver door open, and lighting switch in parking lamp (1ST) or "ON" (2ND) position, warning chime will sound. Power is supplied:
- from lighting switch terminal 12
- to time control unit terminal 5 (without power door locks) or 21 (with power door locks).

Ground is supplied:
- from front door switch LH terminal 2
- to time control unit terminal 2 (without power door locks) or 7 (with power door locks).

Front door switch (driver side) terminal 3 is grounded through body grounds B13 and B19.

Seat Belt Warning Chime
With ignition switch turned ON and seat belt unfastened (seat belt buckle switch LH ON), warning chime will sound for approximately 6 seconds.

Ground is supplied:
- from seat belt buckle switch LH terminal 1
- to time control unit terminal 1 (without power door locks) or 20 (with power door locks). Seat belt buckle switch LH terminal 2 is grounded through body grounds B13 and B19.

WITH MULTI-REMOTE CONTROL SYSTEM
The warning chime is controlled by the smart entrance control unit.

The warning chime is located in the smart entrance control unit.

Power is supplied at all times:
- through 10 A fuse (No.37, located in fuse and fusible link box)
- to smart entrance control unit terminal 10,
- through 10 A fuse [No.12, located in the fuse block (J/B)]
- to key switch terminal 2,
- through 10 A fuse (No.38, located in the fuse and fusible link box)
- to lighting switch terminal 11.

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse [No.10, located in the fuse block (J/B)]
- to smart entrance control unit terminal 33.

Ground is supplied to smart entrance control unit terminal 16 through body grounds M28 and M54. When a signal, or combination of signals, is received by the smart entrance control unit, the warning chime will sound.

Ignition Key Warning Chime
With the key in the ignition switch in the OFF position, and the driver door open, the warning chime will sound.

Power is supplied:
- from key switch terminal 1
- to smart entrance control unit terminal 32.

Ground is supplied:
- from front door switch LH terminal 2
- to smart entrance control unit terminal 29.

Front door switch LH terminal 3 is grounded through body grounds B13 and B19.

Light Warning Chime
With ignition switch OFF, driver door open, and lighting switch in parking lamp (1ST) or "ON" (2ND) position, warning chime will sound. Power is supplied:
- from lighting switch terminal 12
- to smart entrance control unit terminal 34.

Ground is supplied:
- from front door switch LH terminal 2
- to smart entrance control unit terminal 29.

Front door switch LH terminal 3 is grounded through body grounds B13 and B19.

Seat Belt Warning Chime
With ignition switch turned ON and seat belt unfastened (seat belt switch ON), warning chime will sound for approximately 6 seconds.

Ground is supplied:
- from seat belt buckle switch LH terminal 1
- to smart entrance control unit terminal 22.

Seat belt buckle switch LH terminal 2 is grounded through body grounds B13 and B19.