Odometer: Description and Operation
HOW TO CHANGE THE DISPLAY FOR ODO/TRIP METERThe vehicle speed signal and the memory signals from the meter memory circuit are processed by the combination meter and the mileage is displayed.
Depressing the odometer/trip switch toggles the mode in the following order.
The odo/trip meter display mode toggling and trip display resetting can be identified by the amount of time that elapses from pressing the odo/trip meter switch to releasing it.
When resetting with trip A displayed, only trip A display is reset (Trip B operates the same way).
POWER SUPPLY AND GROUND CIRCUIT
Power is supplied at all times
- through 10 A fuse [No. 19, located in the fuse block (J/B)]
- to combination meter terminal 5.
With the ignition switch in the ON or START position, power is supplied
- through 10 A fuse [No. 14, located in the fuse block (J/B)]
- to combination meter terminals 17 and 18.
Ground is supplied
- to combination meter terminals 6 and 39
- through body grounds M57 and M61.