Drive Belt: Service and Repair

Removal and Installation

REMOVAL
1. Remove engine undercover.
2. Fully loosen each belt. Refer to "Power steering oil pump belt". Remove generator and air conditioner compressor belt and then power steering oil pump belt.

CAUTION: Grease is applied to idler pulley adjusting bolt. Be careful to keep grease away from the belts.

INSTALLATION
1. Installation is in the reverse order of removal.

CAUTION:
^ Make sure belts are correctly engaged with the pulley groove.
^ Clean off any for oil and coolant on belts and each pulley groove.

2. Adjust belt tension. Refer to "Power steering oil pump belt".