Engine Controls - MIL ON/DTC P0444 Set: Overview
Classification: EC09-006Reference: NTB09-057
Date: July 16, 2009
2006 ALTIMA; MIL "ON" WITH P0444
APPLIED VEHICLE: 2006 Altima (L31)
APPLIED ENGINE: QR25 (4 cyl) ONLY
IF YOU CONFIRM:
The MIL is "ON" and P0444 (EVAP Canister Purge Volume Control S/V Circuit Open) is stored in ENGINE.
ACTION:
Perform tests as outlined in the Electronic Service Manual (ESM) for DTC P0444.
Erase the DTC.
If all tests check out as "OK", install the EGI Harness Service Kit.
^ The EGI Harness Service Kit is listed in the PARTS INFORMATION section of this bulletin.
^ Refer to the SERVICE PROCEDURE section in this bulletin for installation/repair procedure.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION
Disclaimer