Doors, Hood and Trunk: Adjustments

DOOR




Fitting Adjustment

FRONT DOOR

Longitudinal clearance and surface height adjustment at front end
1. Remove the front fender.
2. Loosen the bolts. Raise the front door at rear end to adjust.
3. Install the front fender.

REAR DOOR
Longitudinal clearance and surface height adjustment at front end
1. Remove the center pillar upper and lower garnish.
2. Accessing from inside the vehicle, loosen the nuts. Open the rear door, and raise the rear door at rear end to adjust.
3. Install the center pillar upper and lower garnish.




STRIKER ADJUSTMENT
1. Adjust the striker so that it becomes parallel with the lock insertion direction.