Data Monitor Procedure

DATA MONITOR PROCEDURE
1. Turn ignition switch OFF.





2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
3. Turn ignition switch ON.





4. Touch "START (NISSAN BASED VHCL)" on CONSULT-II screen.





5. Touch 'ABS" in the "SELECT SYSTEM" screen.
If "ABS" is not indicated, go to GI-39, "Consult-II Data Link Connector (DLC) Circuit". Schematic





6. Touch "DATA MONITOR".
7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
8. Touch "AUTO TRIG" or WARN TRIG" on "SET RECORDING CONDITION" screen.
9. Touch "START" on "SELECT MONITOR ITEM".