Cellular Phone: Service and Repair

Removal and Installation

BLUETOOTH CONTROL UNIT

Removal
1. Remove driver seat.
2. Disconnect Bluetooth control unit harness connectors.




3. Release Bluetooth control unit cover clips (C).
4. Tip Bluetooth control unit cover rearward, and remove Bluetooth control unit cover.
5. Remove Bluetooth control unit bracket screws (A).
6. Remove Bluetooth control unit screws (B).
7. Remove Bluetooth control unit from brackets.

Installation
Installation is in the reverse order of removal.

NOTE: When replacing Bluetooth control unit, Perform pairing procedure. Refer to Owner's Manual Pairing Procedure.

BLUETOOTH ON INDICATOR

Removal

CAUTION: To avoid damage use care when removing console finisher.

- Sunroof switch (2).
- Microphone (3).
- Front personal/map lamp LH (4).
- Interior lamp switch (5).
- Front personal/map lamp RH (6).




1. Remove console assembly, roof finisher.
2. Release Bluetooth ON indicator tabs.
3. Disconnect Bluetooth ON indicator connector.
4. Remove Bluetooth ON indicator (1).