Body Control Module: Service and Repair

BCM

REMOVAL AND INSTALLATION

Removal

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring new BCM after installation. Refer to "Configuration".

1. Disconnect negative battery cable.
2. Remove lower driver instrument panel.




3. Remove screws (2) and release BCM from steering member.
4. Disconnect connectors and then remove BCM.

Installation

NOTE:
- When replacing BCM, it must be configured. Refer to "Configuration".
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-101, "NVIS(NISSAN Vehicle Immobilizer System-NATS)". Antitheft and Alarm Systems

Install in the reverse order of removal.