Diagnostic Strategies

WORK FLOW
1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Perform the preliminary check, refer to SE-31, "PRELIMINARY CHECK". Initial Inspection and Diagnostic Overview
4. Check the self-diagnosis, results using CONSULT-II refer to "Self-diagnosis Results".
5. Repair or replace depending on the self-diagnostic results.
6. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "SYMPTOM CHART".
7. Does the automatic drive positioner system operate normally ?
If it is normal, GO TO 8.
If it is not normal, GO TO 3.

8. Inspection end.