Transmission Position Sensor/Switch: Adjustments

Park/Neutral Position (PNP) Switch Adjustment
1. Remove battery and bracket.
2. Remove cable from range lever.
3. Set range lever in neutral position.





4. Remove range lever and install Tool.
Tool number: KV991J0060 (J-45404)
5. Loosen park/neutral position (PNP) switch bolts.
6. Adjust PNP switch so that Tool pointer aligns with neutral base line on PNP switch body.





7. Tighten PNP switch bolts.
8. Reinstall range lever and cable.
9. Adjust control cable.
10. Reinstall battery and bracket.
11. Check continuity of PNP switch.