Automatic Transmission/Transaxle: Service Precautions

Precautions for A/T Assembly or TCM Replacement
^ When replacing A/T assembly or TCM, refer to the pattern table and initialize TCM if necessary.

TCM INITIALIZATION PATTERNS:

METHOD FOR TCM INITIALIZATION
1. Perform CONSULT-II SETTING PROCEDURE. Refer to "CONSULT-II SETTING PROCEDURE". Consult-II Setting Procedure
2. Set the vehicle following the items listed below.
^ Ignition switch ON.
^ Selector lever "P" or "N" position.
^ Engine not running.
^ Vehicle speed is 0 km/h (0 MPH).
^ Ignition voltage is more than 10.5 Volts.
^ Malfunction was not detected.

3. Touch "WORK SUPPORT".
4. Touch "INITIALIZATION".
5. Initialize TCM following the direction in display