Powertrain Management: Technical Service Bulletins

• Recalls
  • Recall 07V527000: ECM Update for Stalling Condition
  • Recall R0712 - ECM Update for Stalling Condition
    • Overview
    • Service Procedure
      • Check the Current ECM Part Number (P/N)
      • Reprogramming the ECM
      • Idle Air Volume Learning (IAVL) Procedure
    • Owner Letter
  • Recall PB023 - Possible Engine Compartment Fire
    • Overview
    • Repair Overview (Flow Chart)
    • Service Advisor Instructions
    • Service Procedure
      • Procedure A: ECM Reprogramming
      • Procedure B: Check Oil Consumption History
      • Procedure C: Perform Crank Case Pressure Test
      • Procedure D: Oil and Filter Change
      • Procedure E: (If Needed)
      • Procedure F: Replace Engine (If Needed)
    • Appendix
      • Appendix Index
      • Appendix A: Special Tool Kit
      • Appendix B: Complete ECM Reprogramming Instructions
      • Appendix C: Engine Replacement Tips
      • Appendix D: Final Quality Checks
    • Dealer Inventory Vehicles Repair Flow Chart
    • Parts Information
    • Claims Information (Labor Operation Flow Chart)
    • Owner Letter - (Inital Campaign Notification)
    • Owner Letter - (Oil Analysis Results Normal)
    • Owner Letter - (Oil Analysis Abnormal)
• Customer Interest
  • Fuel System - Long Engine Crank Time To Start
    • Overview
    • Service Procedure
  • Electrical - MIL ON/DTC's U1010 or U1000 Stored
• By Symptom
  • Customer Interest
    • Fuel System - Long Engine Crank Time To Start
      • Overview
      • Service Procedure
    • Electrical - MIL ON/DTC's U1010 or U1000 Stored
  • Recalls
    • Recall 07V527000: ECM Update for Stalling Condition
    • Recall R0712 - ECM Update for Stalling Condition
      • Overview
      • Service Procedure
        • Check the Current ECM Part Number (P/N)
        • Reprogramming the ECM
        • Idle Air Volume Learning (IAVL) Procedure
      • Owner Letter
    • Recall PB023 - Possible Engine Compartment Fire
      • Overview
      • Repair Overview (Flow Chart)
      • Service Advisor Instructions
      • Service Procedure
        • Procedure A: ECM Reprogramming
        • Procedure B: Check Oil Consumption History
        • Procedure C: Perform Crank Case Pressure Test
        • Procedure D: Oil and Filter Change
        • Procedure E: (If Needed)
        • Procedure F: Replace Engine (If Needed)
      • Appendix
        • Appendix Index
        • Appendix A: Special Tool Kit
        • Appendix B: Complete ECM Reprogramming Instructions
        • Appendix C: Engine Replacement Tips
        • Appendix D: Final Quality Checks
      • Dealer Inventory Vehicles Repair Flow Chart
      • Parts Information
      • Claims Information (Labor Operation Flow Chart)
      • Owner Letter - (Inital Campaign Notification)
      • Owner Letter - (Oil Analysis Results Normal)
      • Owner Letter - (Oil Analysis Abnormal)
  • Starting problems
    • Fuel System - Long Engine Crank Time To Start
      • Overview
      • Service Procedure
• All Technical Service Bulletins
  • Emissions - System Readiness Test (SRT) Drive Patterns
    • Overview
    • Service Procedure
    • System Readiness Test Drive Patterns
  • Computers/Controls - CONSULT III Plus(R) Saved Data List
  • Engine Controls - ECM Replacement Procedures With Consult 3+
    • Overview
    • Service Procedure
  • Computers/Controls - CONSULT(R) Reprogramming Info.
  • Engine Controls - ECM Programming Information
    • Overview
    • Service Procedure
      • Information
      • Setting Up
    • Programming Unexpectedly Terminated
  • Vehicle - Certification Label/VIN Plate Replacement
  • Fuel System - Long Engine Crank Time To Start
    • Overview
    • Service Procedure
  • Electrical - MIL ON/DTC P0128 Due To Remote Start Sys.
  • Engine Controls - ECM Programming Interruption Recovery
  • Computers/Control - CAN Code, Diagnostic Tips/Guidelines
  • A/T - 5 Speed A/T DTC Diagnostics
  • Engine Controls - Seized O2 Sensor Removal Procedure
    • Overview
    • Service Procedure
  • Engine Controls - ECM VIN Registration Procedure
  • Engine Controls - CONSULTIII(R) ECM Programming
    • Overview
    • General Procedure
      • Part 1
      • Part 2
  • Electrical - Electronic Component Damage Prevention
  • Engine Controls - DTC P0603 Diagnostic Information
  • Engine Controls - Air Flow Meter Service Procedure
  • Engine Controls - MIL ON/Multiple VVT DTC's Set
  • Recall 07V527000: ECM Update for Stalling Condition
  • Recall R0712 - ECM Update for Stalling Condition
    • Overview
    • Service Procedure
      • Check the Current ECM Part Number (P/N)
      • Reprogramming the ECM
      • Idle Air Volume Learning (IAVL) Procedure
    • Owner Letter
  • Engine Controls - ECM Replacement Procedures
    • Overview
    • Service Procedure
  • Electrical - MIL ON/DTC's U1010 or U1000 Stored
  • Fuel System - Cold Weather Engine Starting Tips
  • Recall PB023 - Possible Engine Compartment Fire
    • Overview
    • Repair Overview (Flow Chart)
    • Service Advisor Instructions
    • Service Procedure
      • Procedure A: ECM Reprogramming
      • Procedure B: Check Oil Consumption History
      • Procedure C: Perform Crank Case Pressure Test
      • Procedure D: Oil and Filter Change
      • Procedure E: (If Needed)
      • Procedure F: Replace Engine (If Needed)
    • Appendix
      • Appendix Index
      • Appendix A: Special Tool Kit
      • Appendix B: Complete ECM Reprogramming Instructions
      • Appendix C: Engine Replacement Tips
      • Appendix D: Final Quality Checks
    • Dealer Inventory Vehicles Repair Flow Chart
    • Parts Information
    • Claims Information (Labor Operation Flow Chart)
    • Owner Letter - (Inital Campaign Notification)
    • Owner Letter - (Oil Analysis Results Normal)
    • Owner Letter - (Oil Analysis Abnormal)
  • Body Controls - Configurable BCM Replacement Information
  • Keyless Systems - MIL ON, DTC B2190 Set