Combination Lamp

Removal and Installation

COMBINATION LAMP

Removal
1. Disconnect battery negative terminal.
2. Remove the front bumper fascia.
3. Ensure lighting switch is OFF.




4. Remove the headlamp bolts (A).
5. Pull the headlamp assembly (1) toward the front of the vehicle, detach the headlamp harness (2) from the headlamp assembly, disconnect the bulb connectors and remove.

Installation
Installation is in the reverse order of removal.

NOTE: Confirm headlamp aiming adjustment. Refer to "Aiming Adjustment".

Disassembly and Assembly

Exploded View EXL-238:

COMBINATION LAMP - XENON TYPE

Disassembly

CAUTION:
- Do not touch the glass of the bulb directly by hand. Keep grease and other oily substances away from bulb. Do not touch bulb while it is lit or right after being turned off, burning may result.
- Do not leave bulb out of fog lamp reflector for a long time, dust, moisture, and smoke may affect performance of fog lamp.

1. Remove the plastic cover, disconnect the xenon bulb connector, unlock the retaining spring to remove the xenon bulb.
2. Turn the halogen bulb (high beam) lamp socket counterclockwise to unlock and remove it.
3. Turn the front turn signal lamp bulb socket counterclockwise to unlock and remove it.
4. Pull the front turn signal lamp bulb from its socket.
5. Turn the park/side marker lamp bulb socket counterclockwise to unlock and remove it.
6. Pull the park/side marker lamp bulb from its socket.

Assembly
Assembly is in the reverse order of disassembly.

CAUTION:
- After installing the xenon bulb, be sure to install plastic cover securely to ensure watertightness.

Exploded View EXL-239:

COMBINATION LAMP - HALOGEN

Disassembly

CAUTION:
- Do not touch the glass of the bulb directly by hand. Keep grease and other oily substances away from bulb. Do not touch bulb while it is lit or right after being turned off, burning may result.
- Do not leave bulb out of fog lamp reflector for a long time, dust, moisture, and smoke may affect performance of fog lamp.

1. Turn the halogen lamp bulb (low beam) counterclockwise to unlock and remove it.
2. Turn the halogen lamp bulb (high beam) socket counterclockwise to unlock and remove it.
3. Turn the front turn signal lamp bulb socket counterclockwise to unlock and remove it.
4. Pull the front turn signal lamp bulb from its socket.
5. Turn the park/side marker lamp bulb socket counterclockwise to unlock and remove it.
6. Pull the park/side marker lamp bulb from its socket.

Assembly
Assembly is in the reverse order of disassembly.