Check Before Engine Is Started

Check before Engine Is Started

1.CHECK CVT INDICATOR LAMP
1. Park vehicle on flat surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF. Wait at least 5 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Does shift position indicator come on for about 2 seconds?
YES >> 1. Turn ignition switch OFF.
2. Perform self-diagnosis and note NG items. Refer to TM-293, "CONSULT-III Function (TRANSMISSION)". Consult-III Function (Transmission)
3. Go to TM-421, "Check at Idle". Check at Idle
NO >> Stop "Road Test". Refer to TM-395, "Symptom Table". CVT: RE0F10A