Consult-III Function (Transmission)

CONSULT-III Function (TRANSMISSION)
CONSULT-III can display each diagnostic item using the diagnostic test modes shown below.

FUNCTION:

WORK SUPPORT MODE

Display Item List:

Engine Brake Adjustment
"ENGINE BRAKE LEVEL"
0: Initial set value (Engine brake level control is activated)
OFF: Engine brake level control is deactivated.

CAUTION: Mode of "+1" "0" "-1" "-2" OFF" can be selected by pressing the "UP" "DOWN" on CONSULT-III screen. However, do not select mode other than "0" and "OFF". If the "+1" or "-1" or "-2" is selected, that might cause the irregular driveability.

Check CVT Fluid Deterioration Date
"CVTF DETERIORATION DATE"
More than 210000: It is necessary to change CVT fluid.
Less than 210000: It is not necessary to change CVT fluid.

CAUTION: Touch "CLEAR" after changing CVT fluid, and then erase "CVTF DETERIORATION DATE".

SELF-DIAGNOSTIC RESULT MODE
After performing self-diagnosis, place check marks for results on the TM-259, "Diagnostic Work Sheet". Diagnostic Work Sheet
Reference pages are provided following the items.

Display Items List
Refer to TM-394, "DTC Index". Transmission Control System

DATA MONITOR MODE

Display Items List (Part 1):

Display Items List (Part 2):

Display Items List (Part 3):