Operation CHARM: Car repair manuals for everyone.

Steering Angle Sensor: Service and Repair

STEERING ANGLE SENSOR

Removal and Installation

REMOVAL
1. Remove the spiral cable.





2. Remove the screws (A) and release clips (B) to remove the steering angle sensor (1) from spiral cable (2).

CAUTION: In the case that the ABS actuator and electronic unit (control unit) is replaced, make sure to adjust position of steering angle sensor. Refer to BRC-142, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: Special Repair Requirement".

INSTALLATION
1. Installation is in the reverse order of removal.