Tightening Torque and Sequence

Rod Bearing Cap





Tighten the connecting rod bolts using Tool as follows:
Apply engine oil to the threads and seats of the connecting rod bolts.
Tool number KV10112100 (BT-8653-A)
Step 1 27.4 Nm (2.8 kg-m, 20 ft-lb)
Step 2 0 Nm
Step 3 19.6 Nm (2.0 kg-m, 14 lb-ft)
Step 4 Rotate bolts 90°

CAUTION: Check tightening angle. Do not make judgment by visual inspection.

Check the connecting rod side clearance. Refer to EM-82, "Inspection After Disassembly". Inspection After Disassembly
After tightening the bolts, make sure that the crankshaft rotates smoothly.

OUTER DIAMETER OF CONNECTING ROD BOLT





Measure outer diameter (d) at position as shown.
When "d" exceeds the limit (when it becomes thinner), replace the bolt with a new one.
Limit 7.75 mm (0.3051 in) or less