Repair Work Flow
Repair Work FlowWORK FLOW:
DETAILED FLOW
1.CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
>> GO TO 2
2.PRELIMINARY CHECK
Perform preliminary check. Refer to WT-5, "Preliminary Check". Preliminary Check
>> GO TO 3
3.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-11, "Self-Diagnosis" (with CONSULT-III) or WT-24, "Flash Code Chart" (without CONSULT-III).
Diagnosis System (BCM)
Flash Code Chart
>> GO TO 4
4.SYMPTOM
Check for symptoms. Refer to WT-26, "Symptom Table". Symptom Table
>> GO TO 5
5.MALFUNCTIONING PARTS
Repair or replace the applicable parts.
>> GO TO 6
6.DRIVE TEST
1. Perform a drive test.
2. Check the low tire pressure warning lamp.
>> GO TO 7
7.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-11, "Self-Diagnosis" (with CONSULT-III) or WT-24, "Flash Code Chart" (without CONSULT-III).
Diagnosis System (BCM)
Flash Code Chart
Are any DTC's displayed?
YES >> GO TO 5
NO >> INSPECTION END