CVT: RE0F09B

CONTROL DEVICE

TM-250 Exploded View:

Removal and Installation

REMOVAL
1. Remove the center console assembly.
2. Disconnect the control cable from the control device assembly
3. Disconnect the CVT device harness connector from the control device assembly
4. Remove the control device assembly bolts and the control device assembly.

INSTALLATION
Installation is in the reverse order of removal.
^ When installing the control cable to the control device assembly, make sure that the control cable is fully pressed in with the ribbed surface facing upward.
^ After installation is completed, adjust and check CVT position. Refer to TM-248, "Inspection and Adjustment". CVT: RE0F09B