Diagnosis Procedure

INTELLIGENT KEY


Diagnosis Procedure

1. CHECK INTELLIGENT KEY BATTERY
Check by connecting a resistance (approximately 300Ohm(s)) so that the current value becomes about 10 mA.






Standard : Approx. 2.5 - 3.0V

Is the measurement value within specification?
YES - GO TO 2
NO - Replace Intelligent Key battery. Refer to Service and Repair.
2. CHECK KEYFOB FUNCTION





Check keyfob function using Remote Keyless Entry Tester J-43241.
Does the test pass?
YES - Keyfob is OK.
NO - Replace keyfob. Refer to CONSULT-III Operation Manual.