Consult-III Function (Auto Drive Pos.)

CONSULT-III FUNCTION (AUTO DRIVE POS.)






Self-diagnosis Results

DISPLAY ITEM LIST









NOTE:
- The displays of CAN communication and detection switch display error detecting condition from memory erase to the present on "TIME".
- If error is detected in the past and present error is detected, "CRNT" is displayed.
- If error is detected in the past and present error is not detected, "PAST" is displayed.
- If error has never been detected, nothing is displayed on "TIME".
- Any items other than CAN communication and detection switch count error detection frequency occurred after erase history to "1-127".
- If error was detected in the past, error detection frequency from memory erase to the present is displayed on "TIME".
- If error has never been detected, nothing is displayed on "TIME".
- Can clear the detected memory.
- Normal: Clear memory in normal condition, history is erased and nothing is displayed on "TIME".
- Error: Clear memory in error condition, error is detected again and "1" is displayed on "TIME".

Data Monitor

CAN DIAGNOSIS SUPPORT MONITOR






SELECTION FROM MENU









Active Test

CAUTION: During vehicle driving, it does not perform active test.

NOTE: If active test is performed, reset automatic drive positioner seat memory after performing work.

DISPLAY ITEM LIST