A/T Control/Instruments - Shift Position Indicator Blank: Overview
Classification: AT09-006AReference: NTB09-045A
Date: February 18, 2010
2007-2008 MAXIMA; SHIFT POSITION INDICATOR BLANK
This bulletin has been amended. IF YOU CONFIRM and CLAIMS INFORMATION have been amended. Please discard all previous copies.
APPLIED VEHICLE: 2007-2008 Maxima (A34)
IF YOU CONFIRM:
The Shift Position Indicator in the Combination Meter is blank when gear selection is Park or Neutral (P or N) as seen in figure 1.
^ If you observe abnormal CVT fluid color or odor, excessive contamination in the oil pan, and/or you can isolate an unusual noise coming from the transmission, this TSB does not apply.
^ The shift position, indicator located next to the shift lever still works.
ACTIONS:
Replace the Control Valve Assembly.
Reprogram the TCM.
Initialize the TCM.
Clear any DTCs stored in ENGINE and / or TRANSMISSION.
IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION