Blower Motor: Service and Repair

BLOWER MOTOR

Removal and Installation

REMOVAL
1. Remove instrument panel and pad.
2. Remove side ventilator duct (right).




3. Disconnect blower motor connector (1).
4. Push the flange holding hook (A) toward the blower motor (2), then rotate the blower motor (2) clockwise and remove it from the A/C unit assembly.

CAUTION: When blower fan and blower motor are assembled, the balance is adjusted, do not disassemble to replace the individual parts.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Rotate the blower motor until the blower motor flange holding hook locks securely in A/C unit assembly.