Consult-III Start Procedure

CONSULT-III START PROCEDURE
^ Using CONSULT-III, perform a cruise test and record the result.
^ Print the result and ensure that shifts and lockups take place as per Shift Schedule.

1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
2. Touch "MAIN SIGNALS" to set recording condition.
3. See "Numerical Display", "Bar chart Display" or "Line Graph Display".
4. Touch "START".
5. When performing cruise test. Refer to CVT-43, "Cruise Test". Cruise Test
6. After finishing cruise test part, touch "RECORD".
7. Touch "STORE".
8. Touch "BACK".
9. Touch "DISPLAY".
10. Touch "PRINT".
11. Check the monitor data printed out.