Removal and Installation

Removal and Installation

CAUTION: Before replacing BCM, perform READ CONFIGURATION to save or print current vehicle specification. Refer to With Intelligent Key System.

REMOVAL
1. Remove knee protector. Refer to Exploded View.
2. Remove fuse block (J/B).
3. Remove harness clip.
4. Remove screws.
5. Remove BCM and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Be sure to perform WRITE CONFIGURATION when replacing BCM.
- Be sure to perform the system initialization (NATS) when replacing BCM. Refer to With Intelligent Key System.