LH & RH Front Window Anti-Pinch

POWER WINDOW MAIN SWITCH


Removal and Installation


REMOVAL
1. Disconnect the negative battery terminal.
2. Using a suitable tool, remove the front door grip cover. Refer to Exploded View.

CAUTION:
Wrap a cloth around suitable tools to protect components from damage.





3. Remove the power window main switch locking clip (A).
4. Release the metal clip, then lift the power window main switch and finisher as an assembly upward to remove it from the front door finisher.





5. Disconnect the harness connector.
6. Release the tabs on each side, then separate the switch finisher
(1) from the power window main switch (2) and remove.

CAUTION:
Do not fold the pawl of power window main switch finisher.

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
After every switch harness disconnection, it is necessary to perform the initialization procedure. Refer to LH & RH Front Window Anti-Pinch.