Front And Rear Window Anti-Pinch

REAR POWER WINDOW SWITCH


Removal and Installation


REMOVAL
1. Disconnect the negative battery terminal.





2. Using a suitable tool, remove the rear door arm rest finisher (1), then disconnect the harness connector. Refer to Exploded View.

CAUTION:
Wrap a cloth around suitable tools to protect components from damage.
3. Release the tabs on each side with suitable tool (A), then separate the rear power window switch (2) from the finisher (1) and remove.


INSTALLATION
Installation is in the reverse order of removal.

NOTE:
After every switch harness disconnection, it is necessary to perform the initialization procedure. Refer to Front And Rear Window Anti-Pinch.