Control Failure

C1110 CONTROL FAILURE





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.CHECK SELF DIAGNOSTIC RESULT
With CONSULT-III.
1. Turn the ignition switch OFF to ON.
2. Perform self diagnostic result.
Is DTC C1110 detected?
YES - Proceed to diagnosis procedure. Control Failure.
NO - Inspection End.




Diagnosis Procedure
1.REPLACE ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

CAUTION:
Replace ABS actuator and electric unit (control unit) when self-diagnostic result shows items other than that applicable.
- Replace ABS actuator and electric unit (control unit). Removal And Installation ABS.