Removal And Installation Audio Without Navigation

ANTENNA BASE


Removal and Installation


REMOVAL
1. Remove luggage side upper finisher. Exploded View.
2. Remove assist grip and headlining clips. Exploded View.
3. Pull headlining (rear). Obtain a service area.
4. Remove antenna base mounting nut.
5. Remove antenna base.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
If the antenna base mounting nut is tightened looser than the specified torque, then this will lower the sensitivity of the antenna. On the other hand, if the nut is tightened tighter than the specified torque, then this will deform the roof panel.