CONSULT-III Function (Transmission)

DIAGNOSIS SYSTEM (TCM)


CONSULT-III Function (TRANSMISSION)


FUNCTION
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.






SELF DIAGNOSTIC RESULTS MODE
Testing and Inspection.

DATA MONITOR MODE

Display Items List
















WORK SUPPORT MODE

Display Item List






Engine Brake Adjustment
Under normal operating conditions of the transaxle main body and CVT system, if a customer indicates strangeness of involuntary application of the brake on a downhill run, engine brake is allowed to be released in accordance with "Engine Brake Adjustment".











0: Initial set value (Engine brake level control is activated)
OFF: Engine brake level control is deactivated.

CAUTION:
Mode of "+1", "0", "-1", "-2", "OFF" can be selected by touching "UP" or "DOWN" on CONSULT-III screen. However, do not select mode other than "0" and "OFF". Selecting "+1" or "-1" or "-2" is selected, that may cause irregular driveability.

Conform CVTF Deterioration
- Check CVT fluid deterioration level when driving under severe conditions.






"CVTF DETERIORATION DATE"
More than 210000:
It is necessary to change CVT fluid.
Less than 210000:
It is not necessary to change CVT fluid.
- How to Erase CVT Fluid Deterioration Date
- Select "clear".

Calibration Data
After replacing transaxle assembly, it is necessary to initialize ROM data of TCM. Checking calibration data makes it possible to check that initialization is successful.