With Intelligent Key System

BCM (BODY CONTROL MODULE)


Removal and Installation


CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. .

REMOVAL
1. Remove knee protector. Exploded View.
2. Remove fuse block (J/B).
3. Remove harness clip.
4. Remove screws.
5. Remove BCM and disconnect the connector.
6. Remove the ignition relay and back door lock actuator relay.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Be sure to perform "WRITE CONFIGURATION" when replacing BCM.
- Be sure to perform the system initialization (NATS) when replacing BCM. Work Procedure With Intelligent Key System.