Front Power Window Switch (Passenger Side)

POWER SUPPLY AND GROUND CIRCUIT:_:FRONT POWER WINDOW SWITCH (PASSENGER SIDE) FRONT POWER WINDOW SWITCH (PASSENGER SIDE)





Diagnosis Procedure
1.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window switch (passenger side) harness connector and ground.






Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect BCM connector.
3. Check continuity between BCM harness connector and front power window switch (passenger side) harness connector.






4. Check continuity between BCM harness connector and ground.






Is the inspection result normal?
YES - Replace BCM. Removal And Installation (With Intelligent Key). Removal And Installation (Without Intelligent Key).
NO - Repair or replace harness.