Driver Side

POWER WINDOW MOTOR:_:DRIVER SIDE





Description
Door glass moves UP/DOWN by receiving the signal from power window main switch.




Component Function Check
1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION
Check front power window motor (driver side) operation with power window main switch.
Is the inspection result normal?
YES - Front power window motor (driver side) is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK POWER WINDOW MOTOR (DRIVER SIDE) INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window motor (driver side) connector.
3. Turn ignition switch ON.
4. Check voltage between power window motor (driver side) harness connector and ground.






Is the inspection result normal?
YES - Replace power window motor (driver side). Removal And Installation.
NO - GO TO 2.
2.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.






4. Check continuity between power window main switch harness connector and ground.






Is the inspection result normal?
YES - Replace power window main switch. Service and Repair.
NO - Repair or replace harness.