Only Front Wiper Intermittent Does Not Operate

FRONT WIPER AND WASHER SYSTEM


Only Front Wiper Intermittent Does Not Operate

1.CHECK COMBINATION SWITCH (WIPER SWITCH)

With CONSULT-III
1. Select "BCM" on CONSULT-III, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "FR WIPER INT", turn ON-OFF according to combination switch (wiper switch) operation.
Without CONSULT-III
Combination Switch Inspection .
OK or NG
OK - Replace BCM. Service and Repair .
NG - Check combination switch (wiper switch). Combination Switch Inspection .