B177B

DTC Logic


DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, Related Tests, Information And Procedures, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE


1. ADJUST SOFT TOP POSITION

1.Turn ignition switch OFF and wait at least 4 minutes.
2.Manually operate soft top to fully open.
- GO TO 2.

2. PERFORM DTC CONFIRMATION PROCEDURE

1.Start engine.
2.Operate soft top to fully open and fully close.
3.Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT.
4.Check DTC.
Is DTC detected?
YES- Go to .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM DTC CONFIRMATION PROCEDURE

Perform DTC Confirmation Procedure. .
Is the DTC displayed again?
YES- Replace soft top control unit. Removal And Installation.
NO- INSPECTION END