Without Intelligent Key

KEY SLOT ILLUMINATION

Description

Blinks when keyfob insertion is required.


Component Function Check


1. CHECK FUNCTION

With CONSULT
Check key slot illumination ("KEY SLOT ILLUMI") Active Test mode.
Is the inspection result normal?
YES- Key slot function is OK.
NO- Refer to "Diagnosis Procedure".


Diagnosis Procedure

Regarding Wiring Diagram information, With Remote Keyless Entry.

1. CHECK KEY SLOT ILLUMINATION OUTPUT SIGNAL






Check voltage between key slot connector and ground.





Is the inspection result normal?
YES- GO TO 6
NO- GO TO 2

2. CHECK KEY SLOT POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect key slot connector.





3.Check voltage between slot connector and ground.





Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace key slot power supply circuit.

3. CHECK KEY SLOT GROUND CIRCUIT






Check continuity between key slot connector and ground.





Is the inspection result normal?
YES- GO TO 4
NO- Repair or replace key slot ground circuit.

4. CHECK KEY SLOT CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM and key slot connector.





3.Check continuity between BCM connector and key slot connector.





4.Check continuity between BCM connector and ground.





Is the inspection result normal?
YES- GO TO 5
NO- Repair or replace harness between BCM and key slot.

5. CHECK KEY SLOT

Refer to "Description".
Is the inspection result normal?
YES- GO TO 6
NO- Replace key slot. Without Intelligent Key.

6. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- Inspection End.