Without Intelligent Key

PRE-INSPECTION FOR DIAGNOSTIC

Vehicle Security Operation Check


1. INSPECTION START

Turn ignition switch "OFF" and pull out keyfob from key slot.
NOTE:
Before starting operation check, open front windows.
- GO TO 2

2. CHECK SECURITY INDICATOR LAMP

1.Lock doors using keyfob or mechanical key.
2.Check that security indicator lamp illuminates for 30 seconds.
Does security indicator lamp illuminate?
YES- GO TO 3
NO- Perform diagnosis and repair. Without Intelligent Key.

3. CHECK ALARM FUNCTION

1.After 30 seconds, security indicator lamp will start to blink.
2.Open any door or hood before unlocking with keyfob or mechanical key, or open trunk lid without keyfob or mechanical key.
Does alarm function properly?.
YES- GO TO 4
NO-Check the following.
- The vehicle security system does not phase in alarm mode. Without Intelligent Key.
- Alarm (horn, headlamp and hazard lamp) do not operate. Without Intelligent Key.

4. CHECK ALARM CANCEL OPERATION

Unlock any door or open trunk lid using keyfob or mechanical key.
Does alarm (horn, headlamp and hazard lamp) stop.
YES- Inspection End.
NO- Check door lock function. Sedan.
SEC