Special Repair Requirement

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement


1. SAVING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Description.
NOTE:
If "READ CONFIGURATION" cannot be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
- GO TO 2

2. REPLACE BCM

Replace BCM. Service and Repair.
- GO TO 3

3. WRITING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Special Repair Requirement.
- GO TO 4

4. INITIALIZE BCM (NATS)

Perform BCM initialization (NATS). Refer to CONSULT Operation Manual NATS-IVIS/NVIS.
- Inspection End.