CONSULT Function

DIAGNOSIS SYSTEM (TCM)

CONSULT Function (TRANSMISSION)

CONSULT can display each diagnostic item using the diagnostic test modes shown below.

FUNCTION







WORK SUPPORT MODE

Display Item List





Engine Brake Adjustment

"ENGINE BRAKE LEVEL"
0 : Initial set value (Engine brake level control is activated)
OFF : Engine brake level control is deactivated.

CAUTION:
Mode of "+1""0""1""2""OFF" can be selected by pressing the "UP""DOWN" on CONSULT screen.
However, do not select mode other than "0" and "OFF". If the "+1" or "1" or "2" is selected, that might cause the irregular driveability.
Check CVT Fluid Deterioration Date

"CVTF DETERIORATION DATE"
More than 210000 : It is necessary to change CVT fluid.
Less than 210000 : It is not necessary to change CVT fluid.

CAUTION:
Touch "CLEAR" after changing CVT fluid, and then erase "CVTF DETERIORATION DATE".

SELF-DIAGNOSTIC RESULT MODE

After performing self-diagnosis, place check marks for results on the Diagnostic Work Sheet. Reference pages are provided following the items.
Display Items List
Testing and Inspection.

DATA MONITOR MODE

Display Items List
X: Standard, -: Not applicable, : Option