LH&RH Front Anti-Pinch Coupe

FRONT POWER WINDOW SWITCH

Removal and Installation


REMOVAL

1.Remove the front door armrest finisher. Removal And Installation Sedan.
2.Release the pawls, using suitable tool, then lift the power window/door lock switch and finisher (2) - RH upward as an assembly.





CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
3.Disconnect the harness connector.
4.Remove the power window/door lock switch and finisher (2) RH assembly from the front door finisher.
5.Release the four tabs (two on each side) with a suitable tool (A), then separate the power window/door lock switch (1) from the switch finisher (2).

CAUTION:
Do not bend back the pawls of the switch finisher too far or breakage will occur.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
Perform initialization procedure after switch is connected. LH&RH Front Anti-Pinch Coupe.