B1210

Description


DTC B1209 - B1210 COLLISION DETECTION

The air bag diagnosis sensor unit will set this DTC if it has detected a collision which has resulted in a frontal or side deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag diagnosis sensor unit has not yet been replaced. This DTC can not be erased.

PART LOCATION

Locations.


DTC Logic


DTC DETECTION LOGIC

With CONSULT






DTC CONFIRMATION PROCEDURE (With CONSULT)


1. INSPECTION START

Turn ignition switch ON.
- GO TO 2.

2. CHECK SELF-DIAG RESULT

Check for the DTC on CONSULT.
Is the DTC detected?
YES- Refer to "Diagnosis Procedure (Component Diagnosis)".
NO- Inspection End.


Diagnosis Procedure (Component Diagnosis)

For Frontal Collision or For Side And Rollover Collision.