B26F7

B26F7 BCM

Description

BCM (Body Control Module) controls the various electrical components. It inputs the information required to the control from CAN communication and the signal received from each switch and sensor.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Press door request switch.
2.Check "Self-diagnosis result" using CONSULT.
Is DTC detected?
YES- Go to B26F8.
NO- INSPECTION END


Diagnosis Procedure


1. INSPECTION START

1.Turn ignition switch ON.
2.Check "Self-diagnosis result" using CONSULT.
3.Touch "ERASE".
4.Perform DTC Confirmation Procedure.
See B26F8.
Is DTC detected?
YES- Replace BCM. Removal And Installation.
NO- INSPECTION END