B2820

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Perform quick charging at least 10 seconds.
2.Turn power switch ON.
3.Check "SELF-DIAG RESULTS" of "CHARGER".
Is DTC detected?
YES- Proceed to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS OF LI-ION BATTERY CONTROLLER

With CONSULT
Perform self-diagnosis for "HV BAT".
Is any DTC detected?
YES- Perform trouble diagnosis for the DTC.
NO- When this DTC is detected, the cause may not be in the vehicle. Therefore after erasing the selfdiagnosis result, charge using a different quick charger than the quick charger which is used when the malfunction is detected.