B2902

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Turn power switch ON and wait at least 5 seconds.
2.Check "SELF-DIAG RESULTS" of "CHARGER".
Is DTC detected?
YES- Proceed to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM CONFIRMATION PROCEDURE AGAIN

With CONSULT
1.Erase self-diagnostic result.
2.Turn power switch OFF.
3.Perform DTC confirmation procedure. Refer to "DTC Logic" .
Is the DTC detected again?
YES- Replace on-board charger. Refer to "Removal and Installation" Removal And Installation.
NO- INSPECTION END