C118C

C118C EV SYSTEM

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn power switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK DTC DETECTION

With CONSULT
1.Turn the power switch OFF ON.

CAUTION:
- Be sure to wait of 10 seconds after turning power switch OFF or ON.
- Set the vehicle to READY.
2.Repeat step 1 two or more times.
3.Perform self-diagnosis for "ABS".
Is DTC "C118C" detected?
YES- Proceed to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK VCM SYSTEM

With CONSULT
Perform self-diagnosis for "EV/HEV". Refer to "CONSULT Function" VCM.
Is any DTC detected?
YES- Check the DTC.
NO- GO TO 2.

2. CHECK CAN COMMUNICATION

Check the CAN communication line. Refer to "Trouble Diagnosis Flow Chart" Trouble Diagnosis Flow Chart.
- GO TO 3.

3. CHECK SELF-DIAGNOSIS

With CONSULT
1.Erase self-diagnosis result for "ABS".
2.Turn the power switch OFF ON.

CAUTION:
- Be sure to wait of 10 seconds after turning power switch OFF or ON.
- Set the vehicle to READY.
3.Repeat step 2 two or more times.
4.Perform self-diagnosis for "ABS".
Is DTC "C118C" or "U1000" detected?
YES ("C118C")-GO TO 1.
YES ("U1000")-Refer to "Diagnosis Procedure" Brake Control System.
NO- INSPECTION END