P0BFD

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always power switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK DTC DETECTION

With CONSULT
1.Set the vehicle to READY and wait for 10 seconds or more.
2.Fully open the accelerator and accelerate the vehicle to 60 km/h (37 MPH).
3.Stop the vehicle.
4.Check DTC.
Is "P0BFD" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. REPLACE TRACTION MOTOR INVERTER

Replace the traction motor inverter. Refer to "Removal and Installation"
- END