P315E

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

- Turn power switch OFF and wait at least 20 seconds.
- Make sure that 12V battery voltage is 11 V or more.
- GO TO 2.

2. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Turn power switch OFF and wait at least 60 seconds.
2.Turn power switch OFF and wait at least 10 seconds.
3.Check DTC.
Is DTC detected?
YES- Proceed to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS OF VCM

Perform self-diagnosis of VCM.
Is DTC detected other than P315E?
YES- Check the DTC.
NO- GO TO 2.

2. REPLACE ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

1.Replace ABS actuator and electric unit (control unit). Refer to "Removal and Installation" Removal And Installation.
2.Erase DTC.
3.Perform DTC confirmation procedure. Refer to "DTC Logic" .
Is DTC "P315E" detected again?
YES- Replace VCM. Refer to "Removal and Installation" Removal And Installation.
NO- INSPECTION END